Epson 1000 ICS Mode D'Emploi

Problem Solving

Make sure that neither the Copies setting in your printer 
software, nor the Copies setting in your application is set 
for multiple copies.

■

If the paper doesn’t eject fully, you may have set the 
wrong paper size. Press the x 

Copy

 button to eject the 

paper. Then select the correct paper size in your 
application or printer software.

■

If it’s wrinkled when it ejects, the paper may be damp 
or too thin.

■

If paper doesn’t feed, remove it from the sheet feeder. 
Then reload it against the right edge and slide the left 
edge guide against the other side.

■

If paper jams, turn off your printer, open the cover, 
and remove any paper that’s inside, including any 
small pieces that may have torn off. Carefully reload 
paper and press the x 

Copy

 button.

■

If multiple pages feed at once, remove the paper and 
fan the edges of the stack to separate the sheets. Then 
carefully reload it.

If your paper loads incorrectly or jams frequently:

■

Use new, smooth, high-quality paper, loaded printable 
side up.

■

Don’t load paper above the arrow mark on the left 
edge guide.

■

Place the paper against the right edge and slide the left 
edge guide against it, but not too tightly.