Epson 1000 Guide De Référence

These Level 1 options are found on the SYSTEM CONFIG.

submenu.

T-OFFSET-You can use the T-OFFSET (top offset) option to

make fine adjustments in the position of the printing on the

page. The setting is in dots; each dot is 1/300th of an inch

(0.0846 mm) so you can use this option to raise or lower the

printing on the page up to approximately 1/5th of an inch

(5 mm). The factory setting is 0.

Menu/submenu

Available options

to +63

L-OFFSET-You can use the L-OFFSET  (left offset) option to

make fine adjustments in the position of the printing on the

page. The setting is in dots; each dot is 1/300th of an inch

(0.0846 mm). With this option, you can move the printing on

the page approximately 1/5th of an inch to the left (settings

from -1 to -64) or to the right (settings from +1 to +63). The

factory setting is 0.

Menu/submenu

Available options

to +63

This Level 1 option selects the direction in which the characters

are printed on a page. The ORIENT. option is different for each

printer emulation. See Appendixes B and C for information on

the different printer emulations.