Epson 1100 Guide De Référence

The Memory setting should exactly match the total amount

of memory in your printer. If you add more memory to the

printer, you need to change the Memory setting to match

the amount of printer memory. The additional memory

will not be available unless the Memory setting is correct.

If you are unsure how much memory is installed in your

printer, print a test page by pressing the reset button at the

back of the printer. (Pressing the reset button prints a test

page only if the Ready light is on and the Error light is off.)

The amount of memory (RAM) is stated in KB on the test

page.

Memory can be 1,2,3,4, or 5MB. The default is 1MB.

Page Protection

When Page protection is enabled, the printer reserves

additional memory and does not print a page until the

entire page is fully composed. This allows the printer to

print complex pages that can otherwise cause printer

overrun errors.

The settings for Page Protection are Off, On, and Automatic

(default).

You do not normally need Page Protection However, if

the printer receives an unusually complicated page that

contains a complex image or layout, it might start to print

the page before the processor can finish imaging it,

resulting in the page printing incorrectly.

If you turn on Page Protection, the printer reserves printer

memory and does not begin printing until the processor

has finished imaging the entire page. The page then prints

correctly, although it takes slightly longer to print.