Cnet CWR-901 Mode D'Emploi
-
IP Address: Default IP address of the wireless router.
-
Subnet Mask: Default subnet mask for this wireless router.
-
Enable UPnP: Users can enable or disable uPNP feature here. If enabled, all client
systems that support uPNP, like Windows XP, can automatically discover the
wireless router and access the Internet through it without any configuration.
systems that support uPNP, like Windows XP, can automatically discover the
wireless router and access the Internet through it without any configuration.
-
Save and Restart: Save the parameters and reboot the wireless router.
-
Reset: Click on “Reset” button to undo your changes.
-
Help: To request help information.
3.3 WAN Settings
“WAN Interface Setup” is the page to configure the parameters for the WAN port connecting to the
Internet Service Provider. There are seven WAN access types supported by this router: Static IP,
DHCP, PPPoE, Unnumbered PPPoE, PPTP, L2TP, and DHCP + L2TP:
Internet Service Provider. There are seven WAN access types supported by this router: Static IP,
DHCP, PPPoE, Unnumbered PPPoE, PPTP, L2TP, and DHCP + L2TP:
3.3.1 Static IP
This is the connection type where the user has a static IP address from their service provider..
Select Static IP and enter the IP Address, Subnet Mask, Default Gateway and DNS Server
associated with this connection.
Select Static IP and enter the IP Address, Subnet Mask, Default Gateway and DNS Server
associated with this connection.
-
Select WAN Connection Type: Select Static IP connection
-
IP Address 1(default): Enter the IP address assigned by ISP
-
Subnet Mask 1: Enter the subnet mask provided by ISP
-
Default Gateway: Enter the default gateway address provided by ISP
-
DNS: Enter the DNS address provided by the service provider.
-
Save and Restart: Save the parameters and reboot the wireless router.
-
Reset: Click on “Reset” button to undo your changes.
-
Cancel: To skip the current settings and jump to the Status page.
16