Cnet CWR-901 Mode D'Emploi

- 

Help: To request help information. 

 

DHCP client also called “Dynamic IP Address” is the connection type offered by most cable 
broadband service providers. In this mode the WAN port will automatically receive all it’s 
parameters like IP, Subnet, Gateway and DNS addresses from the ISP.   
 

 

 

- 

Select WAN Connection Type: Select DHCP Client connection 

- 

Clone MAC: If the MAC address of a network card is used for authentication by an 
ISP, you may use “Clone MAC Address” to duplicate the network card’s MAC 
address to the MAC address of the router’s WAN port. Check the Use box and 
enter the NIC MAC address provided by ISP. 

- 

Save and Restart: Save the parameters and reboot the wireless router. 

- 

Reset: Click on “Reset” button to undo your changes. 

- 

Cancel: To skip the current settings and jump to the Status page. 

- 

Help: To request help information. 

 

PPPoE stands for “Point-to-Point Protocol over Ethernet”. PPP is the technology used for dialup 
Internet access. PPPoE works similar to PPP except it works over a network connection. In this 
mode users need to enter their PPPoE username and password. Some ISPs also require a 
service name to be entered. Usually, the IP/DNS addresses are assigned dynamically. However, if 
users have a static IP through PPPoE, then they will need to enter IP and DNS addresses 
provided by the ISP. 
 

 

17