Standard Horizon cpn1010i Mode D'Emploi

Page 26

Owner’s Manual

Warning page. Tap on 

 to accept the terms. Other Warning pages might appear, tap

on 

 to confirm.

For North America users only: If Built-In Charts are out of date other Warning pages are displayed.

5. When a CPN Series Chart Plotter is first turned on it will take some time for the GPS to

acquire a fix of your position. During this time the GPS Status page (see D) will be shown.
This page shows the signal strengths and locations of the GPS Satellites. After a fix is
received the page will be changed to show the vessel’s position on the Chart page (see E).

6. After the Chart page is shown (see E), the vessel will be shown in the center of the

display. CPN Series touch display operations:

Single tap: place the cursor

Pan (press and move finger): pan the chart to see a different area on the chart

Sweep (press and hold, then drag finger): change page

The 

 ShuttlePoint knob when moved will change the location of the cursor. When the

cursor reaches the edge of the chart, the chart will pan.

7. When you move the 

 ShuttlePoint knob you will notice DST and BRG values in the

Cursor Window change. This shows the Distance and Bearing from the GPS fix of your
vessel to the position of the cursor.

The Chart page in 2D Vector is the default page. The Ship Icon (position fix) is in the center
of the screen (Home Mode): as the ship moves through the water the vessel’s position will
be kept in the center of the display.

By default the CPN Series Chart Plotter shows the vessel in the center of the display which
is called Home Mode. To change from Home Mode to Cursor Mode, touch the display or
move the 

 ShuttlePoint knob.

In Cursor Mode the Cross-Hair 

 is shown on the chart. To exit this mode so the Boat Icon

stays in the center of the chart press the 

 key.