Standard Horizon cpn1010i Mode D'Emploi
CPN700i and CPN1010i Multimedia Chart Plotters
Page 27
Cursor Mode allows you to pan around and look at areas on the chart. You can also create
Marks, Routes, measure Distance and Bearing from your current position.
The CPN Series Chart Plotter will automatically exit from Cursor Mode to Home Mode if the
display or a key is not pressed for a user selectable time. The timeout depends on the Home
Mode Revert setting in the General Setup menu (see Par. 2.1.4 “Settings in General Setup
Menu”). Default is 1 minute.
Marks, Routes, measure Distance and Bearing from your current position.
The CPN Series Chart Plotter will automatically exit from Cursor Mode to Home Mode if the
display or a key is not pressed for a user selectable time. The timeout depends on the Home
Mode Revert setting in the General Setup menu (see Par. 2.1.4 “Settings in General Setup
Menu”). Default is 1 minute.
Switching between 2D and 3D Modes
There are two methods to toggle between 2D and 3D modes:
From Main Menu
1. The Chart page in 2D mode is shown (see A). Press the
key, tap on the large Setup
Menu icon.
2. Tap on the small DISPLAY icon on the Desktop. The Chart Display menu appears
(see B).
3. Tapping on DISPLAY MODE selects between 2D and 3D.
4. When 3D has been selected (see C), press the
4. When 3D has been selected (see C), press the
key to exit from menu. The screen
shows the Chart page in 3D (see D).
Using the
key
1. The Chart page in 2D mode is shown (see A).