Standard Horizon cpn1010i Mode D'Emploi

CPN700i and CPN1010i  Multimedia Chart Plotters

Page 97

1. Tap anywhere on the screen and then tap on the 

 Soft Key: the GPS Setup

menu appears.

2. Tap on DIFF CORRECTION SOURCE to select None (to disable).
3. Press the 

 key to exit the menu.

1. Press the 

 key, tap on NMEA. In the bottom of the page the available selections

appear: DIGITAL, ANALOG, COMBO and MONITOR.

The CPN Series Chart Plotter is capable of displaying information in the customizable data
windows from external NMEA-0183 or NMEA-2000 devices, depending on which data
source has been selected

1

.

1

To change the priority of the data source, NMEA-0183 or NMEA-2000, follow the procedure:

1. Press the 

 key, tap on Setup Menu.

2. Tap on ADVANCED. The Advanced Setup menu appears.

3. Tap on DATA SOURCE PRIORITY. The Data Source Priority menu appears.

4. If you want to change the data source with the highest priority, tap on the desired source and it is shown

in the first position.

Depth Sounder, Speed Log with Temp, Wind Speed and Direction, Flux Gate Compass, and
GPS information can be shown in any of the boxes.

The NMEA-0183 sentences and the NMEA-2000 PGNs read from external devices are listed in the
Chapter 8 “Specifications”.

To display the desired NMEA Digital page follow this procedure:

1. Press the 

 key, tap on NMEA.

2. Tap on DIGITAL. There are 6 NMEA Digital pages which can be displayed one after the

other. They can display from 1 to 16 boxes and each data box can be customized. The
default NMEA Digital shows 3 windows:

3. Move the 

 ShuttlePoint knob to the left/right to scroll through all NMEA Digital pages,

otherwise tap anywhere on this page for the Soft Keys to appear, and then tap on the
desired Soft Key to select the NMEA Digital page you want. For example tap on the

 Soft Key to open NMEA Digital page with 6 boxes. See the following picture.