Suunto mosquito Mode D'Emploi

73

You can set one depth alarm in the Mosquito. When 
the depth alarm activates, the  -symbol blinks as long 
as the present depth value exceeds the adjusted value 
and the alarm sounds for 24 seconds. Press any button 
to stop the audible alarm, after it has activated.

To set the depth alarm:

1.  In the Setting Mode [SET], press S four (4) times 
to select the Dive Alarm Setting Mode (Fig. 4.10.).

2. Wait two seconds until the Dive Alarm Setting 
Mode activates automatically. The alarm status [On/
OFF] starts to blink on the display (Fig. 4.11.).

3. Press S to change the selection in the following 
sequence.

->On/OFF status -> depth alarm limit -> dive time 
alarm minutes (-> dive time alarm seconds)

Fig. 4.10. Dive Alarm Setting 
Mode.

Fig. 4.11. Dive Time Alarm. 
Center window displays less 
than 5 minutes dive time.