Canon LV-7292M Manuel D'Instructions

37

Press the MENU button to display the 

On-Screen Menu. Use the Point ▲▼ 

buttons to select 

Aspect and then press 

the Point ► or the OK button.
Use the Point ▲▼ buttons to select the 

desired item and then press the OK button 

.

This projector has the picture screen resize function, which enables you to customize the image size.

Provide the image to fit the screen size.

Provide the image in its original size. When the 

original    image  size  is  larger  or  smaller  than 

the  screen  size  (1024  x  768),  the  projector 

enters  to  the  panning    mode    automatically. 

Use  the  Point  ▲▼◄►  buttons  to  pan  the 

image.  When  adjusted,  the  arrows  will  turn 

red. When reached to the correction limits, the 

arrows will disappear.

Provide the full screen image. 



  •  This  projector  cannot  display  any  resolution 

higher  than  1920  x  1200.  If  your  computer’s 

screen  resolution  is  higher  than  it,  reset  the 

resolution to the lower before connecting to the 

projector.

  •  The  image  data  in  other  than  1024  x  768  is 

modified to fit the screen size in initial mode.

  • 

True  and  Digital  zoom  +/–  are  disabled  and 

cannot  be  displayed  when 

480i,  575i,  480p 

575p,  720p,1035i  or  1080i  is  selected  in  the 

PC System Menu (p. 31).

   •  When 

True  is  selected  in  the  Screen  menu, 

Digital zoom +/- can not be selected.

Provide the last stored aspect screen image. 

Provide the image at the 16:9 wide screen ratio.

Adjust the screen scale and position manually 

with this function. Press the Point ► button 

at 

Custom adj. and the Custom adjustment 

menu is displayed on the screen, you can use 

the Point ▲▼ buttons to choose the item you 

want to adjust.

 

Scale H/V ......  Adjust the Horizontal/Vertical 

screen scale.

 

H&V ...............  When set to On, the aspect 

ratio is fixed. The 

V appears dimmed and 

becomes unavailable. Adjust 

Scale H, then the screen 

scale is automatically modified 

based on the aspect ratio. 

 

Position H/V ..  Adjust the Horizontal/Vertical 

screen position.

 

Common .......  Save the adjusted scale or 

position to all the inputs. 

Press the OK button at 

Common to display a 

confirmation box. To save 

the scale or position, press 

the OK button at 

Yes. When 

Custom is selected, the 

saved scale or position is 

used.

 

Reset .............  Reset the all adjusted values. 

Press the OK button at 

Reset 

to display a confirmation box. 

To reset, press the OK button 

at 

Yes.



  •  When no signal is detected, 

Normal is set 

automatically .

  •  The adjustable range for 

Scale H/V and 

Position H/V is limited depending on the input 

signal.

Scale the image proportionally to fit the entire 

screen.  Either  side  of  image  may  go  over  the 

screen.