Canon LV-7292M Manuel D'Instructions

Page de 84
Computer Input
39
Computer Input
Aspect Setting
(For LV-8227A, LV-8227M)
This projector has the picture screen resize function, which enables you to customize the image size.
Aspect Menu
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the 
original  image size is larger or smaller than the 
screen size (1280 x 800), the projector enters 
to the panning  mode  automatically. Use the 
Point ▲▼◄► buttons to pan the image. 
When adjusted, the arrows will turn blue. When 
reached to the correction limits, the arrows will 
disappear.
Full 
Provide the full screen image. 
Note:
  •  This projector cannot display any resolution 
higher than 1920 x 1200. If your computer’s 
screen resolution is higher than it, reset the 
resolution to the lower before connecting to the 
projector.
  •  The image data in other than 1280x800 is 
modified to fit the screen size in initial mode.
  • 
16:9True and Digital zoom +/– are disabled 
and cannot be displayed when 
480i575i480p
575p, 720p1035i or 1080i is selected in the PC 
System Menu (p.31).
  •  When 
True is selected in the Screen menu, 
Digital zoom +/- can not be selected.
1
2
Press the MENU button to display the 
On-Screen Menu. Use the Point ▲▼ 
buttons to select 
Screen and then press 
the Point ► or the OK button.
Use the Point ▲▼ buttons select the 
desired item and then press the OK button .
Custom
Provide the last stored aspect screen image. 
16:9
Provide the image at the 16:9 wide screen ratio.
Adjust the screen scale and position manually 
with this function. Press the Point ► button at 
Custom adj. and the Custom adjustment menu 
is displayed on the screen, you can use the 
Point ▲▼ buttons to choose the item you want 
to adjust.
 
Scale H/V ......  Adjust the Horizontal/Vertical 
screen scale.
 
H&V ...............  When set to On, the aspect 
ratio is fixed. The 
Scale V 
appears dimmed and becomes 
unavailable. Adjust 
Scale
H, then the screen scale is 
automatically modified based 
on the aspect ratio. 
 
Position H/V ..  Adjust the Horizontal/Vertical 
screen position.
 
Common .......  Save the adjusted scale or 
position to all the inputs. Press 
the OK button at 
Common 
to display a confirmation box. 
To save the scale or position, 
press the OK button at “Yes”. 
When 
Custom is selected, 
the saved scale or position is 
used.
 
Reset .............  Reset the all adjusted values. 
Press the OK button at 
Reset 
to display a confirmation box. 
To reset, press the OK button 
at “Yes”.
Custom adj.
Note:
  •  When no signal is detected, 
Normal is set 
automatically .
  •  The adjustable range for 
Scale H/V and 
Position H/V is limited depending on the input 
signal.
Zoom
Scale  the  image  proportionally  to  fit  the  entire 
screen.  Either  side  of  image  may  go  over  the 
screen.
Custom adj.