Canon LV-7292M Manuel D'Instructions

61

Use the Point ▲▼ buttons to select 

Off, On 

1 or On 2, and then press the OK button to 

make a choice.

Use the Point ▲▼ buttons to enter a number. 

Press the Point ◄ ► buttons to fix the number 

and  move  the  red  frame  pointer  to  the  next 

box. The number changes to . If you fixed an 

incorrect number, use the Point ◄ ► buttons 

to move the pointer to the number you want to 

correct, and then enter the correct number.

Repeat this step to complete entering a four-

digit number.

After entering the four-digit number, move the 

pointer to 

Set. Press the OK button so that 

you can change the following PIN code lock 

setting.

If you entered an incorrect PIN code, 

code and the number () will turn red 

for a moment. Enter the correct PIN code all 

over again.

The PIN code can be changed to your desired 

four-digit number. Press the OK button to 

select 

PIN code change. Pin code dialog box 

appears, use the Point ▲▼ buttons to enter 

the correct code. The New PIN code input 

dialog box appears. Set a new PIN code.



Note:

If you forget your PIN code and unable to change 

it, the PIN code can be reset to the factory 

default setting (1234) according to the following 

procedures.

When you reset the PIN code, the Logo PIN code 

and Key lock will be reset, as well.

1. Unplug the AC Power Cord from the AC outlet.

2. Hold down the OK button on the projector and 

connect the AC Power Cord into the outlet again. 

Keep holding down the OK button until the 

POWER indicator lights. The PIN code returns to 

the factory default setting while the PIN code lock 

state will remain the same as the previous set 

state.

OK button

Enter current PIN code to 

confirm

Enter new PIN code

Select Yes to finish the new 

PIN code setting.