Canon LV-7292M Manuel D'Instructions

62

This function provides the following options in 

the cooling fans’ operation when the projector is 

turned off (p.23).

 

L 1 ....  Normal operation

 

L 2 ....  Slower, lower-sound and longish-time 

than the normal operation (

L 1).

Choose the running speed of cooling fans from 

the following options according to the ground 

elevation under which you use the projector. 

Off................   Normal speed. Set this function 

to Off when using the projector in 

non- high altitude environment.

On 1.............   Faster than Off mode. Select this 

mode when using the projector in 

high altitudes (about 1,000 meters 

to 2,000 meters above the sea 

level) where the fans have less 

cooling effect.

On 2.............   Faster than On 1 mode. Select this 

mode when using the projector 

in higher altitudes (about 2,000 

meters to 3,000 meters above the 

sea level) where the fans have 

lesser cooling effect.

Be sure to reset the Lamp replacement counter 

after the lamp is replaced. (p.68) 

Press the Point

 ▲▼ buttons to choose the 

Lamp counter function and then press the Point 

► or the OK button to access the submenu 

items. 

................ This item shows the 

total accumulated time 

of the lamp usage.

.......  Press the OK but

ton to   

choose 

. Select 

 in 

the confirmation box 

if you want to reset 

the lamp counter, and 

then choose 

Yes in the 

second confirmation 

box to reset lamp 

counter.

When you want to make a digital processing of a 

projected image faster, set this function.

Use the Point ▲▼ buttons, select an item of 

Off 

or 

On.



Note:

Noise reduction and Progressive can not be 

selected when Video delay control function is set to 

On.



Note:

The fan noise becomes louder in 

On 1 and On 2.