Canon LV-8320 Manuel D'Instructions

49

This function enables you to capture an image 

being projected to use it for a starting-up display 

or interval of presentations.

Select 

Capture and press the OK button.  

A confirmation box appears and select 

Yes to 

capture the projected image.

After capturing the projected image, go to the 

Logo select function and set it to 

User. Then the 

captured image will be displayed the next time 

you turn on the projector or when you press the 

BLANK button (p. 28). 

To cancel the capture function, select 

Yes in the 

Quit? confirmation box.



  •  Before capturing an image, select 

Standard in 

the Image select Menu to capture a proper image 

(pp. 34 ,41).

  •  A signal from a computer can be captured up 

to WXGA (1280 x 800). A signal from video 

equipment can be captured except for 

720p, 

1035i, and 1080i. 

  •  When capturing the image that has been adjusted 

by the Keystone function, the adjusted data is 

automatically reset and the projector captures an 

image without keystone correction. 

  •  When Logo PIN code lock function is set to 

On, 

Logo select and Capture can not be selected.  

  •  When starting to capture a new image, the 

previously stored image is cleared even if you 

cancel the capturing.

  •  When there is no captured image or it is 

interrupted while capturing an image, 

User can 

not be selected, you can only switch between 

Default and Off.

This function prevents an unauthorized person 

from changing the screen logo.

 

Off .......... The screen logo can be changed 

freely from the Logo Menu (p. 48).

 

On .......... The screen logo cannot be changed 

without a Logo PIN code.

If you want to change the 

Logo PIN code lock 

setting, press the OK button and the Logo PIN 

code dialog box appears. Enter a Logo PIN code 

by following the steps below. The initial 

PIN code is set to “4321” at the factory.