Canon LV-7490 Brochure
LV-7490 Expand Serial Command Functional Specifications
24
8.5.4
CF_H – POS Command
Command “CF_H-POS_%1”[CR]
%1
“0000~nnnn” --- Directly select Horizontal Position setting value
“nnnn” shows maximum value, it is current Total Dots value - Display Dots value
“UP” -------------- Current Horizontal Position setting value + 1
“DN” -------------- Current Horizontal Position setting value - 1
“DN” -------------- Current Horizontal Position setting value - 1
Details
Set Horizontal Position value of PC signal.
Projector does not save the value set with this command so that it resets when
projector turning into Standby status or ALL is OFF.
This command is available in normal Power ON status.
Projector does not save the value set with this command so that it resets when
projector turning into Standby status or ALL is OFF.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.5.5
CF_V – POS Command
Command “CF_V-POS_%1”[CR]
%1
“0000~nnnn” --- Directly select Vertical Position setting value
“nnnn” shows maximum value, it is current Total Line value - Display Line value
“UP” -------------- Current Vertical Position setting value + 1
“DN” -------------- Current Vertical Position setting value – 1
“DN” -------------- Current Vertical Position setting value – 1
Details
Set Vertical Position value of PC signal
Projector does not save the value set with this command so that it resets when
projector turning into Standby status or ALL is OFF.
This command is available in normal Power ON status.
Projector does not save the value set with this command so that it resets when
projector turning into Standby status or ALL is OFF.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.5.6 CF_DDOTS
Command
Command “CF_DDOTS_%1”[CR]
%1
“0256”~”nnnn” --- Directly select Display Dots setting value
“nnnn” shows maximum value, it is current Total Dots value - Horizontal
Position value
Even number is available and when odd number is set, it is rounded out.
Even number is available and when odd number is set, it is rounded out.
“UP” -------------- Current Display Dots setting value + 2
“DN” -------------- Current Display Dots setting value – 2
“DN” -------------- Current Display Dots setting value – 2
Details
Set Display Dots value of PC signal
Projector does not save the value set with this command so that it resets when
projector turning into Standby status or ALL is OFF.
This command is available in normal Power ON status.
Projector does not save the value set with this command so that it resets when
projector turning into Standby status or ALL is OFF.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]