ASUS ST467 Mode D'Emploi

The OSD (On-Screen Display) menu

43

Sets your preferred language for the OSD menu.

• Date and Time: Sets the current date and time. 
• Clock Display: Sets whether to show the current time on the screen.
• Input: Sets an input source to display when the display is automatically turned 

on next time.

• On/Off Timer: Sets when to turn on or off the display.

Notes:
• Set the current date and time before you set the On/Off Timer.
• When schedule settings overlap, the Everyday setting takes priority over other weekly 

settings.

Sets the display to enter the power saving mode when there is no signal detected.
• Low: All sources can enter the power saving mode and wake up the display.
• High: All sources can enter the power saving mode, but only a VGA signal can 

wake up the display or you have to press the power button to wake up the 

display when other sources are connected.

• Off: If no source is detected, the backlight will continue on.

Notes:
• RS-232C can bring any mode out of the power saving status.
• On Power Save setting High, the LAN function is not available if the display enters Power 

Save or DC off mode.

• RS-232C/LAN: Sets a terminal to control the display.
• IR Passthrough: Select it when multiple displays are connected via RS-232C 

cables.

-  Primary: Designate the display as the primary unit for remote control 

operation. Only this display will be operated by the remote control.

-  Secondary: Designate the display as the secondary unit. The display can 

not be operated by the remote control, and will only receive the control 
signal from the primary display via the RS-232 connection.

Note:
• To reset to the default settings (RS-232C) for Control Setting, press the INFO button on 

the remote control for 5 seconds.

See "Network connection" on page 26 for details.