ASUS ESC4000-FDR G2S Manuel D’Utilisation

Chapter 2:  Hardware setup

2-14

The barebone server comes with a riser card bracket. You need to remove the bracket if you 

want to install PCI Express x16 expansion cards.
To install a PCI Express x16 card

4. 

Press the riser card bracket until the 

golden connectors completely fit the 

slot and the bracket aligns with the rear 

panel.

5. 

Connect the cable(s) to the card, if 

applicable.

3. 

Install a PCI Express x16 card to the 

bracket as shown, and then secure the 

card with a screw.

1. 

Firmly hold the riser card bracket, and 

then pull it up to detach it from the PCI 

Express x16 slot on the motherboard.

2. 

Place the riser card bracket on a flat 

and stable surface, and then remove 

the screw from the slot bay.