ASUS TS300-E7/PS4 Manuel D’Utilisation

Page de 160
Chapter 2:  Hardware setup
2-16
2.6.4 
Installing a hot-swap SATA/SAS hard disk drive
1.  Release a drive tray by pushing the 
spring lock to the right, and then 
pulling the tray lever outward. The 
drive tray ejects slightly after you 
pull out the lever.
2.6.3 
Removing the HDD module cage
1.  Disconnect the all cables from the SATA/SAS backplane on the HDD module 
cage.
2.  Level the HDD module cage latch 
counterclockwise. The HDD module 
cage will be pushed out of the 
chassis.
2
3.  Completely pull out the HDD module 
cage.