ASUS RS500A-E6/PS4 Manuel D’Utilisation

Chapter 3:  Installation options

3-6

3.  Attach the rear end of the server 

rail to the side of the chassis, 

matching each of the two hooks to 

the holes on the rail. Then slide the 

rail toward the front panel until it 

locks in place.

4.  Secure the rear end of the server 

rail to the side of the chassis with 

one screw.

5.  Repeat steps 1 to 4 to attach the second server rail to the other side of the 

chassis.

To attach the rack rails:
1.  Select one unit of space (1U) on the rack where you want to install the 

barebone server.

2.  Install the nuts on the holes of the 1U space on the rack front.
3.  Install the nuts on the holes of the 1U space on the corresponding rack rear.
4.  Measure the depth of the rack to determine the length of the rack rails.
5.  Measure the rack rail when assembled to ensure that it fits the rack.
6.  Position the rack rail to the 1U space on the rack. Ensure that the front end of 

the rack rail goes to the front of the rack space.

7.  Secure the front end of the rail with 

two rack screws.

8.  Secure the rear end of the rail with 

two rack screws.

9.  Repeat steps 5 to 8 to assemble 

and attach the second rack rail.