Manualsbrain.com
  1. Manuels
  2. Marques
  3. Canon
  4. imageCLASS MF249dw
  5. Manuel

Canon imageCLASS MF249dw Manuel

Télécharger
Page de 72
11
En
NOTE
•  You cannot connect both the wired LAN and wireless 
LAN at the same time. In addition, the machine is set to 
the “Wired LAN” by default.
•  When you connect to an unsecured network 
environment, your personal information could be 
disclosed to third parties. Please use caution.
•  If you connect through a LAN in the offi  ce, contact your 
network administrator.
Checking the Router
Select the connection method to the wireless LAN. Select from 
the following two methods depending on the router (access 
point) that you are using. 
 
●
There is a button.
This machine supports WPS 
(Wi-Fi Protected Setup). You 
can easily set up if your router 
(access point) has a button, 
and if the mark 
 is on the 
router.
   If you are not sure whether or not your router supports WPS, 
please see the manual included in the product, or contact the 
product manufacturer.
 
●
 There is no button.
If there is no button on your 
router (access point), you 
may manually select SSID and 
complete the settings. In this 
case, you need to remember 
SSID and network key of your 
router (access point).
how to fi nd out your SSID and network key.
To set up with the WPS PIN code method/To set up 
manually:
  User’s Guide “Connecting to a Wireless LAN”
 Setting  Wireless  LAN 
(MF249dw/MF247dw Only)
 Push Button Mode
1 
Tap <Menu> in the Home Screen.
2 
Tap <Network Settings>.
3 
Tap <Wireless LAN Settings>.
If a screen appears asking whether to enable the wireless 
LAN, tap <Yes>.
4 
Read the message that is displayed, and tap <OK>.
5 
Tap <WPS Push Button Mode>.
Wireless LAN Settings
 SSID Settings
 WPS Push Button Mode
 WPS PIN Code Mode
 Power Save Mode
 Wireless LAN Information
6 
Tap <Yes>.
7 
Press and hold* the button until the lamp lights or 
blinks.
You should press the WPS button within 2 minutes after 
you tap <Yes> in step 6.
*   The time that you should hold the button may vary depending 
on the router you are using.
8 
Wait approximately 2 minutes after the connection.
IP address is set during this period of time.
When an error message appears:
Tap <Close> to close the screen, check whether or not 
the network key is correct, and then retry the settings. 
If the access point cannot be detected even after 
retrying, see the following.
  User’s Guide “When an Error Message Appears”
When checking the network connection:
You can check if the machine is properly connected to 
the network by using a computer that is connected to the 
network.
  User’s Guide “Viewing Network Settings”
To set IP address manually:
  User’s Guide “Connecting to a Wireless LAN”
 Setting the Access Point Manually
1 
 Check SSID or Network Key for a Wireless LAN 
Router/Access Point.
• 
Check the label on the Wireless LAN router.
• 
You can check the SSID or the network key using “Canon 
MF / LBP Wireless Setup Assistant,” which is included in 
the DVD-ROM supplied with the machine.