Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch Guide D’Exploitation
ProSafe VPN Firewall FVS318v3 Reference Manual
Sample VPN Configurations with FVS318v3
C-19
v5.0, January 2012
Configuring the VPN Tunnel
This scenario assumes all ports are open on the FVS318v3 and FVL328.
Figure C-14
Use this scenario illustration and configuration screens as a model to build your configuration.
1. Log in to the FVS318v3 labeled Gateway A as in the illustration (
).
Log in at the default address of
http://192.168.0.1
with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
chosen).
2. Use the VPN Wizard to configure the FVS318v3 at Gateway A.
Follow the steps listed in
using the following parameters as
•
Connection Name: Scenario_1 (in this example)
•
Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel
endpoints
endpoints
•
Remote WAN IP address: 22.23.24.25 (in this example), must be unique at each VPN
tunnel endpoint
tunnel endpoint
•
Remote LAN IP Subnet
–
IP Address: 172.23.9.1 (in this example), must be unique at each VPN tunnel endpoint
NETGEAR-Gateway A
Static IP address
NETGEAR-Gateway B
Static IP address
Note: Based on the network addresses used in this example, you would log in to the
LAN IP address of
http://10.5.6.1
at Gateway A.
Table C-3. Policy Summary
FVL328
Gateway
B
Scenario 1
14.15.16.17
22.23.24.25
WAN IP
WAN IP
172.23.9.1/24
10.5.6.1/24
LAN IP
LAN IP
Gateway
A
FVS318v3