Netgear D6400 – AC1600 WiFi VDSL/ADSL Modem Router—802.11ac Dual Band Gigabit Manuel D’Utilisation
Manage the Internet Settings Manually
76
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
Which connection type you must use depends on your IPv6 ISP. Follow the directions that
your IPv6 ISP gave you.
your IPv6 ISP gave you.
•
If your ISP did not provide details, use the 6to4 tunnel connection type (see
•
If you are not sure what type of IPv6 connection the modem router uses, use the Auto
Detect connection type, which lets the modem router detect the IPv6 type that is in use
(see
Detect connection type, which lets the modem router detect the IPv6 type that is in use
(see
•
If your Internet connection does not use PPPoE, DHCP, a fixed IP address, or
pass-through but is IPv6, use the Auto Config connection type, which lets the modem
router autoconfigure its IPv6 connection (see
pass-through but is IPv6, use the Auto Config connection type, which lets the modem
router autoconfigure its IPv6 connection (see
86).
When you enable IPv6 and select any connection type other than IPv6 pass-through, the
modem router starts the stateful packet inspection (SPI) firewall function on the WAN
interface. The modem router creates connection records and checks every inbound IPv6
packet. If the inbound packet is not destined to the modem router itself and the modem router
does not expect to receive such a packet, or the packet is not in the connection record, the
modem router blocks this packet. This function works in two modes: In secured mode, the
modem router inspects both TCP and UDP packets. In open mode, the modem router
inspects UDP packets only.
modem router starts the stateful packet inspection (SPI) firewall function on the WAN
interface. The modem router creates connection records and checks every inbound IPv6
packet. If the inbound packet is not destined to the modem router itself and the modem router
does not expect to receive such a packet, or the packet is not in the connection record, the
modem router blocks this packet. This function works in two modes: In secured mode, the
modem router inspects both TCP and UDP packets. In open mode, the modem router
inspects UDP packets only.
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero
or omit it. The following errors invalidate an IPv6 address:
colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero
or omit it. The following errors invalidate an IPv6 address:
•
More than eight groups of hexadecimal quartets
•
More than four hexadecimal characters in a quartet
•
More than two colons in a row
Set Up an IPv6 Connection Through Auto Detect
If you are not sure what type of IPv6 connection the modem router uses, use the Auto Detect
connection type, which lets the modem router detect the IPv6 type that is in use.
connection type, which lets the modem router detect the IPv6 type that is in use.
To set up an IPv6 Internet connection through auto detection:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Type http://www.routerlogin.net.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Click the OK button.
The BASIC Home page displays.