Xerox Phaser 5335 Mode D'Emploi

118

6 Troubleshooting

1. Pull the front cover release levers ("A") on 

both sides of the printer towards you and 

open the front cover.

2. Open the top cover.

3. As necessary, hold the lever on the right 

side of the fuser cover and open the fuser 

cover.

Important
• The fuser is hot. Do not touch areas with labels 

indicating high temperature and those surrounding the 

labels. Otherwise, you can get burnt.

4. While holding the cover open, use your 

other hand to clear the jammed paper.

5. Close the top cover and then the front 

cover.

Important
• When closing the front cover, be careful not to get your 

fingers caught between (the left, right, top, or bottom 

edge of) the cover and the printer.