Xerox Phaser 1235 Fascicule

The following is a sequence of commands that can be sent to the printer to download a 
macro to the hard drive. In this example, the macro is named “a_macro.”

In this example:

■

<ESC>%-12345X is the PJL UEL command which starts this sequence.

■

@PJL<CR><LF> is the mandatory PJL command following the UEL command.

■

@PJL FSDOWNLOAD... downloads a macro of 29 bytes named “a_macro.”

■

The phrase “This is the macro” is positioned at x=900 and y=1500 by this macro.

■

<ESC>%-12345X is the UEL command which ends this sequence.

Executing this macro requires the following PCL sequence:

Note

The macro ID must be the same case as in the original download command.

Note

The byte count (after the “n” and before the “W”) must equal the ID byte count 
plus 1.

<ESC>%-12345X @PJL<CR><LF>

@PJL FSDOWNLOAD FORMAT:BINARY NAME =”0:\pcl\macros\a_macro” 

SIZE=29<CR><LF>

<ESC>*p900x1500YThis is the macro <ESC>%-12345X

<ESC>&n8W<HEX’04’>new_mac<CR,LF>

Sets the current macro ID to the string ID 

“new_mac”

<ESC>&n8W<HEX’05’>a_macro<CR,LF>

Associates the current macro ID with the 

supplied string ID

<ESC>&f2x<CR,LF>

Executes this macro