Xerox SmartSend Support & Software Fascicule
Figure 1
2. Enter colon port number after the host name (e.g. v-sundir:389)
3. Enter a forward slash and base (e.g. v-sundir:389/o=Test_Domain)
4. Enter valid LDAP property mappings.
5. Select Apply button and then select Test to verify success.
Note: Short host names may or may not work so please use the full host name (e.g. v-
sundir.domain.com).
sundir.domain.com).
How do I create a scan directory that can be used by the SMARTsend
Scan to Home Utility to scan to an FTP home location?
Scan to Home Utility to scan to an FTP home location?
Option 1: Create the scan directory inside the FTP root directory.
Note: The following sample procedure is based on a Windows 2000 server.
1. Open Windows Explorer on the computer or server that will be the “scan server.”
2. Create a directory inside of the last directory of the FTP root path (the ftp root path in this example is
c:\inetpub\ftproot).
3. Right-click the ftproot directory (or the last directory in the FTP root path that the scan server was just
created in) and select Sharing (Figure 1). The folder Properties dialog will appear.
Figure 1
8