Xerox DocuColor 12 Printer with Fiery EX12 Mode D'Emploi
DOCUCOLOR 12 USER GUIDE
7–3
OUTPUT FORMATS
1
2
3
4
5
6
7
Multiple-Up
The Multiple-Up feature (Figure 2) enables you to
copy 2, 4, or 8 images from multiple originals onto
a single page, as illustrated in Figure 3. Each
image is centered in its space.
copy 2, 4, or 8 images from multiple originals onto
a single page, as illustrated in Figure 3. Each
image is centered in its space.
The default is set to 1 Page Up to produce a single
image on a single page.
image on a single page.
NOTE: Keep the following notes in mind when
using Multiple-Up:
using Multiple-Up:
•
All originals must be the same size. Paper
size or magnification is determined by the first
original that is scanned.
size or magnification is determined by the first
original that is scanned.
•
Do not Interrupt the Multiple-Up job.
•
The following features may not be used in
conjunction with Multiple-Up:
conjunction with Multiple-Up:
–
Margin Shift
–
Repeat Image
–
Book Copying
•
When you copy original documents from the
Document Glass, you can only select a 25-
100% reduction.
Document Glass, you can only select a 25-
100% reduction.
•
Depending on the size of the original, some
image loss might occur along the edge of the
image.
image loss might occur along the edge of the
image.
•
Enlarged images cannot exceed 17 inches
(432 mm) in the X direction.
(432 mm) in the X direction.
•
Do not use 12 x 18-inch or SRA3 paper.
The order and final rotation of images depend on
the selections you make for the Image Order and
Original Orientation options, which are described
below.
the selections you make for the Image Order and
Original Orientation options, which are described
below.
Figure 2: Multiple-Up feature
Figure 3: Example of Multiple-Up
F
E
Four
originals:
originals:
Four-up
output:
output:
F
E