Xerox DocuColor 12 Printer with Fiery EX12 Mode D'Emploi
MAKING COPIES
3–8
DOCUCOLOR 12 USER GUIDE
2
3
4
5
6
7
3
Making copies using features
The feature tabs on the Touch Screen (Figure 6)
enable you to configure the copier/printer to suit
your copying needs.
enable you to configure the copier/printer to suit
your copying needs.
The procedure below leads you quickly through a
number of features you may want to use in making
copies. It assumes that the feature tabs are in the
default configuration. You can find detailed
information about the features and options
referred to in this section in the chapters that
follow.
number of features you may want to use in making
copies. It assumes that the feature tabs are in the
default configuration. You can find detailed
information about the features and options
referred to in this section in the chapters that
follow.
NOTE: The Auto Center feature is included in the
Margin Shift options.
Margin Shift options.
1
Press the Clear All (CA) button to clear any
previous programming.
previous programming.
Use any of steps 2 through 11 that apply to your
job and desired output.
job and desired output.
2
Select the required quantity.
•
Use the Keypad to enter the quantity.
•
Press the Clear (C) button on the Numeric
Keypad to clear an incorrect quantity.
Keypad to clear an incorrect quantity.
Figure 6: Touch Screen with Basic Copying
tab in Default Configuration
Figure 7: Keypad and Clear Key