Vitek VT 4205 (BK) Manuel D’Utilisation
4
ENGLISH
Multicooker
The multicooker is intended for cooking.
The multicooker is intended for cooking.
For your information:
All pictures in this manual are given for reference only.
The unit shown in the pictures can be slightly different
from the purchased one.
All pictures in this manual are given for reference only.
The unit shown in the pictures can be slightly different
from the purchased one.
DeScriPtioN
1. Body
2. Control panel
3. Display
4. Lid
5. Lid opening button
6. Carrying handle
7. Steam release openings
8. Steam valve
9. Power cord connector
10. Heating element
11. Temperature sensor
12. Bowl
13. Steam cooking basket
14. Soup ladle
15. Spatula
16. Measuring cup
Display and control panel
17. “Start” button with indicator
18. “Menu” button
19. “Minutes” button
20. “Bread” button
21. “Time” button
22. “Hours” button
23. “Multicook” button
24. “Timer” button with indicator
25. “Taste” button
26. “Keep warm/Stop” button with indicator
Additional accessories:
27. Yoghurt cups
28. Lids
29. Tray
1. Body
2. Control panel
3. Display
4. Lid
5. Lid opening button
6. Carrying handle
7. Steam release openings
8. Steam valve
9. Power cord connector
10. Heating element
11. Temperature sensor
12. Bowl
13. Steam cooking basket
14. Soup ladle
15. Spatula
16. Measuring cup
Display and control panel
17. “Start” button with indicator
18. “Menu” button
19. “Minutes” button
20. “Bread” button
21. “Time” button
22. “Hours” button
23. “Multicook” button
24. “Timer” button with indicator
25. “Taste” button
26. “Keep warm/Stop” button with indicator
Additional accessories:
27. Yoghurt cups
28. Lids
29. Tray
– For additional protection it is reasonable to install
a residual current device (RCD) with nominal op-
eration current not exceeding 30 mA. To install RCD
contact a specialist.
eration current not exceeding 30 mA. To install RCD
contact a specialist.
SAFetY MeASureS
Before using the unit, read this instruction manual care-
fully. Keep this manual for future reference.
Use the unit for intended purposes only, as specified in
this manual. Mishandling the unit can lead to its break-
age and cause harm to the user or damage to his/her
property.
Before using the unit, read this instruction manual care-
fully. Keep this manual for future reference.
Use the unit for intended purposes only, as specified in
this manual. Mishandling the unit can lead to its break-
age and cause harm to the user or damage to his/her
property.
• Before using the unit, closely examine the power
cord and the power cord connector located on the
unit body and make sure that they are not damaged.
Never use the unit if the power cord or power cord
connector is damaged.
unit body and make sure that they are not damaged.
Never use the unit if the power cord or power cord
connector is damaged.
• Before switching the unit on make sure that voltage
of the mains corresponds to unit operating voltage.
• Power cord is equipped with “euro plug”; plug it into
the socket with reliable grounding contact.
• Do not use adapters for plugging the unit in.
• Make sure that the power cord is properly inserted
into the corresponding connector of the unit body
and the socket.
and the socket.
• Use only the supplied power cord, do not use a
power cord of other units.
• Use the supplied removable parts only.
• Place the unit on a flat heat-resistant surface away
from sources of moisture, heat and open flame.
• Correct work of the unit is possible at the height of
0-2,000 meters above the sea level.
• Place the unit with free access to the mains socket.
• Use the unit in places with proper ventilation.
• Do not expose the unit to direct sunlight.
• Do not place the unit too close to walls and furni-
ture walls.
• Provide that the power cord does not contact with
hot surfaces and sharp furniture edges. Avoid dam-
aging the isolation of the power cord.
aging the isolation of the power cord.
• Do not touch the power cord or power plug with
wet hands.
• Do not immerse the unit, the power cord and power
plug into water and other liquids.
• If the unit was dropped into water, unplug it immedi-
ately. Do not put your hands into water! Apply to the
authorized service center for further use of the unit.
authorized service center for further use of the unit.
• Do not insert foreign objects into the openings of
the unit or between its parts.
• Provide that edges of clothes or foreign objects do
not get between the lid and unit body.
• Do not leave the operating unit unattended, always
switch the unit off and unplug it when you are not
using it.
using it.
• To avoid injury do not bend over the steam release
openings and opened bowl.
• Do not touch the lid during operation, open the lid by
pressing the lid opening button.
• Be very careful when opening the multicooker lid.
• Keep the steam release openings clean, clean them
when they get dirty. Do not cook products which
may block the steam valve in the multicooker.
may block the steam valve in the multicooker.
• Never use the unit without the installed bowl and do
not switch the multicooker on without products and
sufficient amount of liquid in the cooking bowl.
sufficient amount of liquid in the cooking bowl.
• Do not use the multicooker if the silicone gasket on
the inner surface of the lid is damaged.
• Follow the recommendations in the recipe book for
amount of dry products and liquids while cooking.
• Do not remove the bowl during operation.
• Do not cover the multicooker during operation.
• Watch the level of liquid remaining in the bowl dur-
ing steam cooking.
• Do not carry the unit during operation. Use the car-
rying handle; unplug the unit, remove the bowl with
products and let it cool down preliminary.
products and let it cool down preliminary.
VT-4205_IM.indd 4
24.07.2013 14:49:31