Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques

To enable and control Home Agent services on the router, use the ip mobile home-agent global 
configuration command. To disable these services, use the no form of this command.

ip mobile home-agent [home-agent address] [accounting] [binding overwrite] [broadcast] 

[care-of-access acl] [data-path-idle minutes] [dynamic-address] [lifetime number] [aaa | 
attribute framed-pool] [message-string][nat-detect] [non-hotline profile profile-id] 
[options] [redundancy] [reject-static-addr] [revocation] [replay seconds] [resync-sa] 
[reverse-tunnel off] [roam-access acl] [hotline profile profile-id] [strip-realm] 
[suppress-unreachable] [local-timezone] [nat] [unknown-ha [accept | deny]] 
[send-mn-address]

no ip mobile home-agent [home-agent address] [accounting] [binding overwrite ] [broadcast] 

[care-of-access acl] [data-path-idle] [dynamic-address] [lifetime number] [aaa | attribute 
framed-pool] [message-string] [nat-detect] [non-hotline profile profile-id] [options] 
[redundancy] [reject-static-addr] [revocation] [replay seconds] [resync-sa] [reverse-tunnel 
off] [roam-access acl] [hotline profile profile-id] [strip-realm] [suppress-unreachable] 
[local-timezone] [nat] [unknown-ha [accept | deny]] [send-mn-address]

home-agent address

(Optional) IP address for virtual networks.

(Optional) Enables Home Agent accounting.

(Optional) Enables or disables the deletion of a stale binding identified by 
the Home Address, MAC address, and NAI information in the registration 
request.

(Optional) Enables broadcast datagram routing. By default, broadcasting is 
disabled.

care-of-access acl

(Optional) Controls which care-of addresses (in registration request) are 
permitted by the Home Agent. By default, all care-of addresses are 
permitted. The access control list can be a string or number from 1 to 99.

data-path-idle minutes

(Optional) Configures the global idle timer in minutes, and deletes the 
mobility binding entry when there is no traffic for a period of time (idle 
time). The range is 1 - 65535 minutes.

dynamic-address 

(Optional) Configures Dynamic HA assignment address.

lifetime number

(Optional) Specifies the global registration lifetime for a mobile node. Note 
that this can be overridden by the individual mobile node configuration. 
Range is from 3 to 65535 (infinity). Default is 36000 seconds (10 hours). 
Registrations requesting a lifetime greater than this value will still be 
accepted, but will use this lifetime value.

(Optional) Specifies HA AAA access settings.

(Optional) Supports the RADIUS Framed Pool name downloaded during 
authentication.

(Optional) Enables or disables support for message extension and the 
delivery of the text from the AAA server to the user.

(Optional) Specifies Home Agent redundancy operation.

(Optional) Rejects used Mobile Node Static IP address request.

(Optional) Enables Registration Revocation.