Perform this task to register an applet with Embedded Event Manager and to define the EEM applet using
event applet and action applet commands. Only one event applet command is allowed in an EEM applet.
Multiple action applet commands are permitted. If no event and no action commands are specified, the
applet is removed when you exit configuration mode.

_ioswd_sub1_path
_ioswd_sub2_path

Process name of subevents.

_ioswd_sub1_period
_ioswd_sub2_period

Time period, in seconds and optional milliseconds, used for
measurement in subevents.

_ioswd_sub1_pid
_ioswd_sub2_pid

Process identifier of subevents.

_ioswd_sub1_taskname
_ioswd_sub2_taskname

Task name of subevents.

_ioswd_sub1_value
_ioswd_sub2_value

CPU utilization of subevents measured as a percentage.

Watchdog mem_used Events

_ioswd_sub1_diff
_ioswd_sub2_diff

Percentage value of the difference that triggered the event.

Note

This variable is set only when the
_ioswd_subx_is_percent variable contains a value of
1.

_ioswd_sub1_is_percent
_ioswd_sub2_is_percent

Identifies whether the value is a percentage. A value of 0
means that the value is not a percentage; a value of 1 means
that the value is a percentage.

_ioswd_sub1_path
_ioswd_sub2_path

Process name of subevents.

_ioswd_sub1_pid
_ioswd_sub2_pid

Process identifier of subevents.

_ioswd_sub1_taskname
_ioswd_sub2_taskname

Task name of subevents.

_ioswd_sub1_value
_ioswd_sub2_value

CPU utilization of subevents measured as a percentage.

Table 1

Cisco System-Defined Environment Variables (continued)

Environment Variable

Description