Cisco Cisco IOS Software Release 12.3(2)XF

Cisco IOS Release 12.3(9a)BC adds the following new MIB support for the Cisco uBR7100 series 
routers.

For additional information about Cisco Broadband Cable MIBs for the Cisco CMTS, refer to the 
following resources on Cisco.com:

Cisco CMTS Universal Broadband Router MIB Specifications Guide 

SNMP Object Navigator

Cisco IOS Release 12.3(9)BC introduces support for the CISCO-CABLE-METERING-MIB on the 
Cisco uBR7100 series universal broadband routers. The CISCO-CABLE-METERING-MIB contains 
objects that provide subscriber account and billing information in the Subscriber Account Management 
Interface Specification (SAMIS) format. This format is specified by the Data-over-Cable Service 
Interface Specifications (DOCSIS) Operations Support System Interface (OSSI) specification.

The MODULE-IDENTITY for the CISCO-CABLE-METERING-MIB is ciscoCableMeteringMIB, and 
its top-level OID is 1.3.6.1.4.1.9.9.424 
(iso.org.dod.internet.private.enterprises.cisco.ciscoMgmt.ciscoCableMeteringMIB).

This MIB has the following constraints: 

The packet counters displayed by CLI commands are reset to zero whenever the Cisco CMTS router 
is rebooted. 

The packet counters displayed by SNMP commands are retained across router resets. 

These counters are 64-bit values and could rollover to zero during periods of heavy usage.

For additional SAMIS information, refer to the following resources:

Cisco IOS Release 12.3(9a)BC introduces additional features for the CISCO-CABLE-QOS-MONITOR 
MIB, including the following: 

Clarified the descriptions of a number of objects.