Cisco Cisco IOS Software Release 12.3(2)XF
8
Release Notes for Cisco uBR7100 Series for Cisco IOS Release 12.3 BC
OL-16010-07
System Requirements
The image subset legend for
is as follows:
•
i = IP routing, MPLS-VPN support, and non cable interface bridging, including Network Address
Translation (NAT)
Translation (NAT)
•
k8 = DOCSIS Baseline Privacy and MPLS-VPN support
•
p = IP routing with Intermediate System-to-Intermediate System (IS-IS) and Border Gateway
Protocol (BGP); MPLS-VPN support; no NAT
Protocol (BGP); MPLS-VPN support; no NAT
•
s = “Plus” features: NAT and Inter-Switch Link (ISL)
Note
All images support all of the hardware listed in the
, unless
otherwise indicated.
Supported Hardware
This section describes the hardware supported by the Cisco uBR7100 Universal Broadband Router in
Cisco IOS Release 12.3(21a)BC and 12.3(23)BC releases.
Cisco IOS Release 12.3(21a)BC and 12.3(23)BC releases.
For detailed descriptions of the new hardware features, see the
.
The following models of the Cisco uBR7100 series routers are supported in Cisco IOS 12.3BC software
releases.
releases.
•
Cisco uBR7111
•
Cisco uBR7114
•
Cisco uBR7111E
•
Cisco uBR7114E
Port Adapter Cards
lists and describes the port adapters supported by Cisco uBR7100 series routers in Cisco IOS
Release 12.3(23)BC5.
Table 3
Memory Recommendations for the Cisco uBR7100 Series Routers,
Cisco IOS
Cisco IOS
Release 12.3 BC Feature Sets
Feature Set
Software Image
Recommended
Flash Memory
Flash Memory
Recommended
DRAM Memory
DRAM Memory
Runs
From
From
Two-Way Data/VoIP Images
DOCSIS Two-Way
ubr7100-p-mz
16 MB Flash
128 MB DRAM RAM
DOCSIS Two-Way IP Plus
ubr7100-is-mz
16 MB Flash
128 MB DRAM RAM
DOCSIS Two-Way with BPI
ubr7100-k8p-mz
16 MB Flash
128 MB DRAM RAM
DOCSIS Two-Way IP Plus with BPI
ubr7100-ik8s-mz
16 MB Flash
128 MB DRAM RAM
Boot Image
UBR7100 Boot Image
ubr7100-boot-mz
None
None
—