Cisco Cisco Unified MeetingPlace Audio Server Manuel De Maintenance
3-16
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 3 Installing the 8112 Server
Mounting the 8112 server
Mounting into an EIA equipment rack
The 8112 server can also be mounted in a 19 or 23-inch EIA equipment rack. In this configuration, the
server is mounted on the front rails.
server is mounted on the front rails.
Step 1
If installing the system in a 19-inch rack, no additional mounting equipment is necessary when installing
the system. Proceed to step 2 below.
the system. Proceed to step 2 below.
If installing the system in a 23-inch rack, you must obtain extension brackets from the rack manufacturer.
Install the optional extender brackets as described by the rack manufacturer.
Install the optional extender brackets as described by the rack manufacturer.
Step 2
Slide the server into the front of the rack.
Step 3
Attach the system to the rack with eight Phillips-head screws that shipped with the system as in
.
Figure 3-8
Mounting into an EIA Equipment Rack
Mounting a breakout box
If your installation requires a breakout box (T1 PRI or E1 configuration), complete this section. If it does
not, proceed to the
not, proceed to the
rack mounting holes