Cisco Cisco Unified MeetingPlace Audio Server Manuel De Maintenance
4-92
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 4 Configuring the 8106 Server
Testing the installation
Testing recorded meetings
If the system is configured for recordings, follow this procedure. If it is not, proceed to the next section,
the
the
.
Step 1
Schedule a recorded meeting.
Step 2
Verify that the meeting is indeed recorded and retrievable after the meeting.
Testing non-recorded meetings, ad hoc recording
If the system is configured for recordings, follow this procedure. If it is not, proceed to the next section,
the
the
.
Step 1
Schedule a meeting without recording.
Step 2
Attend the meeting and activate the recording by pressing #61.
Step 3
Verify that the meeting is indeed recorded and that it is retrievable after the meeting.
Testing web conferencing
If web conferencing is installed, refer to the Web Conferencing System Manager’s Guide to perform a
functional check.
functional check.
Testing network latency
To test for network latency, follow this procedure.
Step 1
Access the CLI and type
ping -s 1000 <IP address of another machine on the network>
and then press
Enter.
Step 2
Once you have received several reply messages, type
<Ctrl> C
.
If there is no reply, the MeetingPlace server cannot make a network connection to the machine you
specified. Verify the IP address and consult the internal networking contacts.
specified. Verify the IP address and consult the internal networking contacts.
Step 3
Verify there is 0% packet loss. See