Cisco Cisco Unified MeetingPlace Audio Server Manuel De Maintenance
4-36
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 4 Configuring the 8106 Server
Configuring the system
Warning
If this installation requires NSF codes, refer to
before
proceeding. If you are unsure if NSF codes are required, refer to Appendix D to confirm.
Step 1
At the tech$ prompt, type
port
and press Enter.
appears. (For more information about the
“port” command, see
.)
Figure 4-42 port Command Menu
Step 2
Type
5
and press Enter to modify the group record. The second line in
appears.
Figure 4-43 Modifying the Port Group
meetingplace:tech$ port
MeetingPlace is up
***** P O R T / G R O U P C O N F I G M E N U *****
1) View port record(s)
2) Modify port record
3) Copy port records
4) View group record(s)
5) Modify group record
x) Exit program
Enter command:
Enter command: 5
Enter port group record number [0..31] : 0
------------ GROUP 0 --------------
--- To skip over a field, just press <cr> ---
Activate the group? [y] : y
Card type [ T1] : T1
Signaling [ ] : protocol table
Protocol table [ 0] : 2
Number of DID digits [ 0] :
Human assistance? [n] :
Flash transfer? [n] :
Outdial? [y] :
Enter command: x