Cisco Cisco ASR 5000
MURAL Hardware Installation Reference Guide
EMC is now configured for MURAL. Now reboot the blades on which LUNs are
attached, using the
reload
command:
>
en
#
conf t
#
reload
Wait until blade comes up after reboot, login to each MURAL node and verify LUN
WWID numbers.
>
en
#
conf t
(config)#
username admin password admin@123
(config)#
license install LK2-RESTRICTED_CMDS-88A4-FNLG-XCAU-U
(config)#
tps multipath show
(config)#
write memory
Copyright © 2016, Cisco Systems, Inc.
70