SINGER SE340 LEGACY Manuel D'Instructions

22

6HOHFWWKHVWUDLJKWVWLWFKFHQWHUQHHGOHSRVLWRQ1R

 &KHFNWKHSUHVVHUIRRW$OO3XUSRVH)RRW

Refer to page 8 for changing the presser foot.

2. Place the fabric under the presser foot and lower the 

presser foot.

 +ROGEDFNXSSHUWKUHDGDQGSUHVVWKH6WDUW6WRSEXWWRQRU

press the foot controller pedal.

Keep holding thread after sewing a few stitches.

Lightly guide the fabric while sewing.

 <RXFDQUHJXODWHWKHVHZLQJVSHHGE\SUHVVLQJWKH6SHHG

Control buttons or the foot control. The buttons are used to 

set the speed when using start/stop button and also sets 

the top speed when using foot control.

 :KHQ\RXUHDFKHQGRIVHDPSUHVVWKH6WDUW6WRSEXWWRQ

to stop sewing or release the foot controller pedal.

5. Press the Thread Cutter button.

Reverse stitching is used for reinforcing the ends of the seams.

 6WDUWVHZLQJVWLWFKHV

2. Press and hold the Reverse button to sew reverse stitch

until start point.

6. Raise the presser foot lifter and remove the fabric.

3.   Release the Reverse button and sew forward until reach 

the end of seam.

4.   Press and hold Reverse button and sew 4-5 reverse 

stitches.

5.  Release Reverse button and sew until end of seam.

 6WRSVHZLQJ

NOTE:

6WLWFKSDWWHUQV1RDQG1RKDYHDEXLOWLQUHYHUVHVWLWFK

6HHSDJHIRULQIRUPDWLRQRQKRZWRVHZWKHVHVWLWFKHV

If upper thread is breaking, machine will stop automatically.

Rethread the upper thread and resume sewing.