Cisco Cisco UCS C210 M1 General-Purpose Rack-Mount Server Fiche De Données
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Cisco UCS C22 M3 High-Density LFF Rack Server
56
SUPPLEMENTAL MATERIAL
RAID Summary
■
ROM1 and ROM15 embedded RAID upgrade options each support up to 4 drives.
■
The LSI MegaRAID SAS 9270CV-8i, 9240-8i, and 9220-4i RAID controller cards each support up
to 4 drives
to 4 drives
See
for a summary of the supported RAID configuration options.
NOTE: If you do not select a PCIe RAID controller or one of the embedded RAID
upgrade options (ROM1 or ROM15), you will have an embedded SATA-only RAID
controller that supports up to four SATA-only drives (RAID 0, 1, 10).
upgrade options (ROM1 or ROM15), you will have an embedded SATA-only RAID
controller that supports up to four SATA-only drives (RAID 0, 1, 10).
Table 29 Supported RAID Configurations
Server
# CPUs
Embedded
RAID
Internal PCIe
RAID #1
1
Notes . . .
1. If you want to boot from a device other than the 9270CV-8i, 9240-8i, or 9220-4i MegaRAID PCIe cards, you can
leave the cards installed. Just disable the OPROM for their slots, and the system will boot even with the cards
installed.
installed.
Internal PCIe
RAID #2
2
2. This server does not support dual RAID controllers.
# Drives
Supported
PCIe Slots
3
3. A = available slot, O = occupied slot, U = unsupported slot (slot 2 is not supported in 1-CPU systems)
1
2
C22 M3 LFF
1
Not allowed
Installed
slot 1 (default)
4
4. The OPROM is enabled for the default PCIe RAID controller slots. If you want to enable a different slot, you
must go into the BIOS and enable the OPROM for the desired slot and disable the OPROM for the default PCIe
slot (see
slot (see
Not allowed
4 internal
O
U
1
Enabled
Not allowed
Not allowed
4 internal
A
U
C22 M3 LFF
2
Not allowed
Installed
slot 2 (default)
Not allowed
4 internal
A
O
2
Enabled
Not allowed
Not allowed
4 internal
A
A