Cisco Cisco Finesse 8.5(3) Guide De Montage
If the media check passes, select OK to open the Product Deployment Selection screen. Continue
to Step 3.
to Step 3.
If the media check fails, the installation terminates.
Step 3
The Product Deployment Selection screen states that the Cisco Finesse product suite will be
installed. This screen has only one choice—OK.
installed. This screen has only one choice—OK.
Select OK to open the Proceed with Install screen.
Step 4
The Proceed with Install screen shows the version of the product that is currently installed (if
any) and the version of the product for this ISO. For the initial installation, the version currently
installed shows NONE.
any) and the version of the product for this ISO. For the initial installation, the version currently
installed shows NONE.
Select Yes on the Proceed with Install screen to open the Platform Installation Wizard screen.
Step 5
On the Platform Installation Wizard screen, select Proceed to open the Basic Install screen.
Step 6
Select Continue on the Basic Install screen to launch the installation wizard.
The Basic Install wizard launches a series of screens that present questions and options pertinent
to the platform and the setup configuration. Help is available for each wizard screen.
to the platform and the setup configuration. Help is available for each wizard screen.
The first Basic Install wizard screen is Timezone Configuration.
Step 7
In the Timezone Configuration screen:
a.
Use the up and down arrows to locate the local time zone that most closely matches your
server location. You can also type the initial character of the time zone to move to that
item in the list. The Timezone field is based on country and city and is mandatory. Setting
it incorrectly can affect system operation.
server location. You can also type the initial character of the time zone to move to that
item in the list. The Timezone field is based on country and city and is mandatory. Setting
it incorrectly can affect system operation.
b.
Select OK to open the Auto Negotiation Configuration screen.
Step 8
On the Auto Negotiation Configuration screen, select whether you want to use automatic
negotiation for the settings of the Ethernet network interface card (NIC).
negotiation for the settings of the Ethernet network interface card (NIC).
Then
If
Select Yes to open the MTU Configuration
screen.
screen.
The Ethernet NIC attached to your hub or Ethernet
switch supports automatic negotiation.
switch supports automatic negotiation.
Proceed to Step 9.
Select No to open the NIC Speed and
Duplex Configuration screen, where you
Duplex Configuration screen, where you
You want to disable autonegotiation and specify
NIC speed and duplex settings
NIC speed and duplex settings
can manually configure the settings as
required for your network.
required for your network.
Specify the speed of the NIC in megabits
per second. Speed options are 10 or 100.
per second. Speed options are 10 or 100.
Cisco Finesse Installation and Getting Started Guide Release 8.5(3)
15
Chapter 2: Installation
Obtain the Installation Files