Cisco Cisco IOS Software Release 15.2(3)E

For the Software Configuration Guide, Cisco IOS Release 15.2(2)E (Industrial Ethernet 3010 Switch), go to 

.

You should review this section before you begin working with the switch. These are known limitations that will not be fixed, 
and there is not always a workaround. Some features might not work as documented, and some features could be affected by 
recent changes to the switch hardware or software.

A static IP address might be removed when the previously acquired DHCP IP address lease expires. 

This problem occurs under these conditions:

When the switch is started without a configuration (no config.text file in flash memory).

When the switch is connected to a DHCP server that is configured to give the switch an address. (The dynamic IP 
address is assigned to VLAN 1).

Cisco EnergyWise

Support for Cisco EnergyWise Version 2.8. For more information, see the Cisco 
EnergyWise software release notes and configuration guide. For more information, see 
the Cisco EnergyWise software release notes and the configuration guide here: 

IP Device Tracking

Enhancement to IP device tracking for ARP probes; command now supports new 
keyword ip device tracking probe auto-source fallback 0.0.0.100 255.255.255.0 
override.

Plug-N-Play

Cisco Open Plug-n-Play agent is a software application that is running on a Cisco IOS 
or IOS-XE device and provides zero-touch deployment of all new devices. The 
application facilitates the acquisition and loading of pertinent images, configuration 
files, and other required files to the device along with notifications for various events. 
(Cisco IE 3010 only supports Cisco IOS)