Manualsbrain.com
  1. Manuels
  2. Marques
  3. Cisco
  4. Cisco Firepower Management Center 4000
  5. Guide De Montage

Cisco Cisco Firepower Management Center 4000 Guide De Montage

Télécharger
Page de 50
 
5-4
Cisco NGIPS for Blue Coat X-Series Installation and Configuration Guide
 
Chapter 5      Managing Cisco NGIPS for Blue Coat X-Series 
  Using the Configuration Menu
To enter the configuration menu :
Step 1
Enter the following command at the X-Series CLI prompt: 
application Sf3DSensor vap
-
group vap_group_name config
where 
vap_group_name
 is the name of the VAP group where Cisco NGIPS for Blue Coat X-Series is 
installed.
Follow the procedures to change your configuration:
  – To change the management interface, see 
.
  – To change the managing Defense Center, see 
.
  – To change the registration key, see 
  – To change the NAT ID, see 
Changing the Management Interface
The following procedure explains how to change the management interface for a VAP group.
To change the management interface:
Step 1
From the Configuration Menu, select 
1 Configure Management Interface 
to change the management 
interface. 
Step 2
When prompted, enter the device name configured for the new management interface. This is the device 
name attached to the circuit. 
Step 3
From the Configuration Menu, select 
5 Exit 
to quit.
Step 4
Modify the corresponding circuit to use the new device name.
For more information, see 
.
Step 5
Enter the following command to restart the application:
application Sf3DSensor vap
-
group vap_group_name restart
where 
vap_group_name 
is the name of the VAP group.
Changing the Managing Defense Center
The following procedure explains how to change the managing Defense Center for a VAP group using 
the following steps:
Step 1
Delete Cisco NGIPS for Blue Coat X-Series from its managing Defense Center using the Device 
Management page (
Devices > Device Management
). See the FireSIGHT System User Guide for more 
information.
Step 2
Change the managing Defense Center for the VAP group using the procedure described in this section.
Step 3
Re-add Cisco NGIPS for Blue Coat X-Series to the new managing Defense Center as described in 
.