Cisco Cisco Firepower Management Center 4000 Guide Du Développeur
2-4
FireSIGHT System Database Access Guide
Chapter 2 Setting Up Database Access
Downloading the JDBC Driver
Step 1
On the Defense Center, select
System > Local > Configuration
.
Step 2
Click
Database
.
The Database Settings menu appears.
Step 3
Select the
Allow External Database Access
check box.
The
Access List
field appears.
Step 4
Type the fully qualified domain name (FQDN), or IPv4 address, of the Defense Center in the
Server
Hostname
field, depending on your third-party application requirements. You cannot use an IPv6 address
as you cannot use an IPv6 address to install a certificate.
If you type an FQDN, you must make sure that the client can resolve the FQDN of the Defense
Center. If you type an IP address, you must make sure that the client can connect to the Defense
Center using the IP address.
Center. If you type an IP address, you must make sure that the client can connect to the Defense
Center using the IP address.
Step 5
To add database access for one or more IP addresses, click
Add Hosts
.
An
IP Address
field appears in the
Access List
field.
Step 6
In the
IP Address
field, you have the following options, depending on the IP addresses you want to add:
•
an exact IPv4 address (for example,
192.168.1.101
)
•
an exact IPv6 address (for example,
2001:DB8::4
)
•
an IP address range using CIDR notation (for example,
192.168.1.1/24
)
•
For information on using CIDR in the FireSIGHT System, see IP Address Conventions in the
FireSIGHT System User Guide.
FireSIGHT System User Guide.
•
any
, to designate any IP address
Step 7
Click
Add
.
The IP address is added to the database access list.
Step 8
Optionally, to remove an entry in the database access list, click the delete icon (
).
Step 9
Click
Save
.
The database access settings are saved.
Step 10
Continue with the procedure in the next section,
Downloading the JDBC Driver
License:
Any
After you create an External Database user and configure the Defense Center to allow database access,
download the JDBC driver to the client system. You must use this JDBC driver to connect to the
database.
download the JDBC driver to the client system. You must use this JDBC driver to connect to the
database.
To download the JDBC driver:
Access:
Admin
Step 1
On the Defense Center, select
System > Local > Configuration
.
Step 2
Click
Database
.