Cisco Cisco IOS Software Release 12.0(13)S7

© 2006–2007 Cisco Systems, Inc. All rights reserved.

The MPLS VPN—Show Running VRF feature provides a Cisco IOS command-line interface (CLI) 
option to display a subset of the running configuration on a router that is linked to a Virtual Private 
Network (VPN) routing and forwarding (VRF) instance. You can display the configuration of a specific 
VRF or of all VRFs configured on a router.

On heavily loaded routers, the display of the configuration file might require several pages or screens. 
As the configuration increases in size and complexity, the possibility of misconfiguration also increases. 
You might find it difficult to trace a problem on a router where you have several VRFs configured. A 
command that displays all the elements of the configuration linked to a VRF allows for easier 
troubleshooting on a per-VRF basis and facilitates comparisons among configurations of different VRFs 
on the same router. 

Your Cisco IOS software release may not support all of the features documented in this module. To reach 
links to specific feature documentation in this module and to see a list of the releases in which each feature is 
supported, use the 

.

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image 
support. Access Cisco Feature Navigator at 

. You must have an account on 

Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at 
the login dialog box and follow the instructions that appear.