Cisco Cisco IOS Software Release 12.0(13)S7
MPLS VPN—Show Running VRF
Feature Information for MPLS VPN—Show Running VRF
18
Multiple Cisco IOS Releases
Feature Information for MPLS VPN—Show Running VRF
lists the release history for this feature.
Not all commands may be available in your Cisco IOS software release. For release information about a
specific command, see the command reference documentation.
specific command, see the command reference documentation.
Cisco IOS software images are specific to a Cisco IOS software release, a feature set, and a platform.
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
the login dialog box and follow the instructions that appear.
Note
lists only the Cisco IOS software release that introduced support for a given feature in a given
Cisco IOS software release train. Unless noted otherwise, subsequent releases of that Cisco IOS
software release train also support that feature.
software release train also support that feature.
Table 3
Feature Information for MPLS VPN—Show Running VRF
Feature Name
Releases
Feature Information
MPLS VPN—Show Running VRF
12.2(28)SB
12.0(32)SY
12.2(33)SRB
12.2(33)SXH
12.0(32)SY
12.2(33)SRB
12.2(33)SXH
The MPLS VPN—Show Running VRF feature provides a
CLI option to display a subset of the running configuration
on a router that is linked to a VRF. You can display the
configuration of a specific VRF or of all VRFs configured
on a router. A command that displays all the elements of the
configuration linked to a VRF allows for easier
troubleshooting on a per-VRF basis and facilitates
comparisons among configurations of different VRFs on the
same router.
CLI option to display a subset of the running configuration
on a router that is linked to a VRF. You can display the
configuration of a specific VRF or of all VRFs configured
on a router. A command that displays all the elements of the
configuration linked to a VRF allows for easier
troubleshooting on a per-VRF basis and facilitates
comparisons among configurations of different VRFs on the
same router.
In 12.2(28)SB, this feature was introduced.
In 12.0(32)SY, support was added for a Cisco IOS
12.0SY release.
12.0SY release.
In 12.2(33)SRB, support was added for a Cisco IOS
12.2SR release.
12.2SR release.
In 122(33)SXH, support was added for a Cisco IOS
12.2SX release.
12.2SX release.
The following sections provide information about this
feature:
feature:
•
•
•
The following commands were modified by this feature:
show running-config vrf and show policy-map interface
brief.
show running-config vrf and show policy-map interface
brief.