Cisco Cisco IOS Software Release 12.0(14)S
Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E Input/Output Controllers
show controllers gigabitethernet
11
Cisco IOS Release 12.0(14)S
show controllers gigabitethernet
To display initialization block information, transmit ring, receive ring, and errors for the interface
controllers about the Gigabit Ethernet interface of the Cisco 7200-I/O-GE+E, use the
show controllers gigabitethernet privileged EXEC command.
controllers about the Gigabit Ethernet interface of the Cisco 7200-I/O-GE+E, use the
show controllers gigabitethernet privileged EXEC command.
show controllers gigabitethernet slot/port
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
This command is used on the Cisco 7200-I/O-GE+E to display hardware and software information
about the Gigabit Ethernet interface.The I/O controller is always found in slot 0.
about the Gigabit Ethernet interface.The I/O controller is always found in slot 0.
slot
Slot number on the interface.
port
Port number on the interface.
Release
Modification
12.1(3a)E
This command was introduced.
12.0(14)S
Support for the Cisco 7200-I/O-GE+E controller was introduced on the
S train.
S train.