Cisco Cisco Content Security Management Appliance M1070 Mode D'Emploi

If multiple Web Security appliances with different features enabled are assigned to the same 
Configuration Master, you should publish to each appliance separately, and perform this check before 
each publish. 

On the Security Management appliance, choose Web > Utilities > Web Appliance Status. 

Click the name of a Web Security appliance to which you will publish a Configuration Master. 

Scroll to the Security Services table. 

Verify that the Feature Keys for all enabled features are active and not expired. 

Compare the settings in the Services columns: 

The Web Appliance Service column and the Is Service Displayed on Management Appliance? 
column should be consistent. 

Enabled = Yes

Disabled and Not Configured = No or Disabled. 

N/A = Not Applicable. For example, the option may not be configurable using a Configuration 
Master, but is listed so that you can see the Feature Key status. 

Configuration mismatches will appear in red text. 

If the enabled/disabled settings for a feature do not match, do one of the following: 

Change the relevant setting for the Configuration Master. See 

. 

Enable or disable the feature on the Web Security Appliance. Some changes may impact multiple 
features. See the information about the relevant feature in the AsyncOS for Cisco Web Security 
Appliances User Guide. 

Enable the features for which you want to publish settings using a Configuration Master. 

Determine which features must be enabled and disabled. See 

. 

On the Security Management appliance, choose Web > Utilities > Security Services Display.

Click Edit Settings. 

The Edit Security Services Display page lists the features that appear in each Configuration Master. 

“N/A” alongside a feature indicates that the feature is not available in that Configuration Master version.