Cisco Cisco IOS Software Release 12.0(23)S
ATM VC Bundle Management on Cisco 12000 Series 8-Port OC-3 STM-1 ATM Line Cards
Supported Standards, MIBs, and RFCs
4
Cisco IOS Release 12.0(23)S
Availability of Cisco IOS Software Images
Platform support for particular Cisco IOS software releases is dependent on the availability of the
software images for those platforms. Software images for some platforms may be deferred, delayed, or
changed without prior notice. For updated information about platform support and availability of
software images for each Cisco IOS software release, refer to the online release notes or, if supported,
Cisco Feature Navigator.
software images for those platforms. Software images for some platforms may be deferred, delayed, or
changed without prior notice. For updated information about platform support and availability of
software images for each Cisco IOS software release, refer to the online release notes or, if supported,
Cisco Feature Navigator.
Supported Standards, MIBs, and RFCs
Standards
•
No new or modified standards apply to this feature.
MIBs
•
No new or modified MIBs apply to this feature.
RFCs
•
No new or modified RFCs apply to this feature.
Prerequisites
The Cisco 12000 Series Internet Router must be equipped with an 8-Port OC-3 STM-1 ATM line card
and must be running Cisco IOS Release 12.0(23)S or later.
and must be running Cisco IOS Release 12.0(23)S or later.
VC Bundle Management Configuration Task List
See the following sections for configuration tasks for the VC bundle management feature. Each task in
the list is identified as either required or optional.
the list is identified as either required or optional.
•
•
•
•
Creating a VC Bundle
To create a bundle and enter bundle configuration mode, in which you can assign attributes and
parameters to the bundle and all of its member VCs, use the following command in subinterface
configuration mode:
parameters to the bundle and all of its member VCs, use the following command in subinterface
configuration mode:
Command
Purpose
Router (config-subif)# bundle bundle-name
Creates the VC bundle specified as bundle-name and enters
bundle configuration mode.
bundle configuration mode.