Cisco Cisco IOS Software Release 12.0(21)S

The following is sample output for the ping command in the interactive mode:

Router# ping

Protocol [ip]: atm

ATM Interface: atm1/1.1

VPI value [0]: 0

VCI value [1]: 500

Loopback - End(0), Segment(1) [0]:

Repeat Count [5]:

Timeout [2]:

Type escape sequence to abort.

Sending 5, 53-byte end-to-end OAM echoes, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 4/9/12 ms

The following sections provide references related to the ATM OAM Ping.

Configuring PVCs and mapping a protocol address to a 
PVC while configuring ATM

“Creating PVCs” chapter in the 

Cisco IOS Wide-Area Networking 

Configuring  ATM

“Configuring ATM” chapter in the 

WAN commands, complete command syntax, 
command mode, command history, defaults, usage 
guidelines, and examples

Release 12.3

Configuring ATM OAM traffic reduction

 feature module

Configuring PVCs with or without OAM

sample configuration

Detecting failures when using OAM cells and PVC 
management

 technical note

ITU-T Specification I.610 (ITU-T specification for 
B-ISDN operation and maintenance principles and 
functions).