Cisco Cisco IOS Software Release 12.4(11)T
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Integrated Data, Voice, and Video Services for ISDN Interfaces
How to Configure Integrated Data, Voice, and Video Services for ISDN Interfaces
9
Integrating Data, Voice, and Video Services for ISDN Interfaces
Examples
dial-peer voice 12 pots
information-type video
incoming called-number 408
direct-inward-dial
Troubleshooting Tips
Use the
command to verify the dial peer configuration.
What to Do Next
To configure a voice class codec, continue with the
. If a voice class codec is already configured, or if you plan reference a video codec on the dial
peer, proceed to the
Configuring the Voice Class Codec
Use this procedure to configure a voice class codec, to be referenced by the VoIP dial peer.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
voice class codec tag
4.
codec preference value codec-type [bytes payload-size]
5.
video codec [h261 | h263 | h263+ | h264]
Step 5
direct-inward-dial
Example:
Router(config-dial-peer)# direct-inward-dial
Enables the direct inward dialing (DID) call treatment for
an incoming called number.
an incoming called number.
Step 6
information-type
[fax | video | voice]
Example:
Router(config-dial-peer)# information-type
video
Selects a specific information type for a VoIP or POTS dial
peer.
peer.
•
fax—Sets information type to fax.
•
video—Sets information type to video.
•
voice—Sets information type to voice. This is the
default.
default.
Note
To return to the default value, use the default
information-type command in dial peer
configuration mode.
information-type command in dial peer
configuration mode.
Command or Action
Purpose