Cisco Cisco IOS Software Release 12.2(10)
4
Update the Image in Bootflash to the 12.2(10)DA1 dboot Image
OL-2702-01
Installation Notes
Note
If you are upgrading from Cisco IOS Release 12.1(6)DA, 12.1(6)DA2, 12.1(7)DA, 12.1(7)DA2,
12.1(7)DA3, 12.2(1b)DA, 12.2(1b)DA1, 12.2(5)DA, 12.2(5)DA1, 12.2(7)DA, or 12.2(10)DA you do
not need to reformat the bootflash. You can skip this section and follow the DSLAM upgrade
procedure at the following URL:
12.1(7)DA3, 12.2(1b)DA, 12.2(1b)DA1, 12.2(5)DA, 12.2(5)DA1, 12.2(7)DA, or 12.2(10)DA you do
not need to reformat the bootflash. You can skip this section and follow the DSLAM upgrade
procedure at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/dsl_prod/ios_dsl/rel122/config/04conf09.htm
.
Note
We highly recommend that you have console access to the NI-2 card during the upgrade procedure.
You can use the console connection to troubleshoot any unexpected events that occur during
the upgrade.
You can use the console connection to troubleshoot any unexpected events that occur during
the upgrade.
To update the boot image, perform the following steps in privileged EXEC mode:
Command
Purpose
Step 1
DSLAM# dir bootflash:
Verify that the bootflash image is ni2-dboot-mz.121-5.da1 or
ni2-dboot-mz.121-4.da. If it is neither, go to the
ni2-dboot-mz.121-4.da. If it is neither, go to the
and perform the instructions there, and
then return to this step. This is required because of a problem
(CSCdr89374) in old bootflash images.
(CSCdr89374) in old bootflash images.
Step 2
DSLAM# dir flash:
Display the name of the Flash file that begins ni2- and use it as
filename in
filename in
.
Step 3
DSLAM# delete flash:filename
Delete the Flash file name found in
and
until all files in the Flash file have been deleted.
Step 4
DSLAM# squeeze flash:
Recover available space in Flash memory.
Step 5
DSLAM# copy
tftp:
//tftpserver:TFTPBOOT/ni2
-dsl-mz.122-10.da1 flash:
Copy the Cisco IOS image from a TFTP server to Flash.
Step 6
DSLAM# configure terminal
DSLAM (config)# no boot system
DSLAM (config)# boot system
flash:ni2-dsl-mz.122-10.da1
DSLAM# end
Enter global configuration mode.
Disable the boot from system.
Specify the name of the system image to load at startup.
End global configuration mode.
Step 7
DSLAM# copy running-config
startup-config
Save your changes to the startup configuration.
Step 8
DSLAM# reload
Reload the system to upgrade the image.
Step 9
DSLAM# show version
Confirm that the running image is ni2-dsl-mz.122-10.da1. If it is
not, go to
not, go to
.
Step 10
DSLAM# format bootflash:
Erase all information in bootflash memory. Answer y to all
confirm questions. When the DSLAM returns you to the EXEC
prompt, bootflash memory is successfully formatted and ready
for use.
confirm questions. When the DSLAM returns you to the EXEC
prompt, bootflash memory is successfully formatted and ready
for use.
Ensure that the bootflash is 3.8 MB total. If it is not, go to
.